I needed a way to attach my keys to my backpack. I had a number of these cable clamps cluttering my house, and had started using one of the smaller size ones to attach my keys to things. However, when the clamp was open, the keys and the clamp were likely to become separated. My solution was to drill a small hole in the clamp, thread a pink zip tie through the hole and loop it back through the same hole, then through the ratchet case. The case end is much larger than the hole I drilled, so it won’t pull through. The resulting loop can swivel, and as long as the keyring is attached, the resulting assembly is permanent.
Problem solved in less than five minutes, without epoxy, duct tape or a trip to a store!
